TDCSH today we’re going to teach manufacturing
a real Air Hockey A game like the ones you find in a room
of games But with a smaller size for
you can play at home Compete with your friends and have fun with this
Amazing Air Hockey Today TDCSH To make our Air Hockey you have left
in the video description Measures and table templates And a link to the materials and tools
if you need any If you want to use the templates have to
cut them by this line With a knife and straight edge cuts will
perfect You can also do without air hockey
templates Using only measures coming
in the same .pdf For the board surface will use an
cardboard centimeter thick Or several plates glued until
that thickness In this plate paste templates In this order and with glue stick The dotted rectangles will cut
with a knife Then we cut the legs of the table You have all the measures in .PDF In small legs Take the paperboard thickness Mark it 2 times on the side And cut to make them smaller We place the legs with the shorter side
down And draw a line 4 cm. side Then we scored a point cut line
to 4 cm. the lower edge We do this on both sides Finally we draw a line between both
points And we cut with the blade So are the long legs And so short To find ourselves short stick them inside
of the long And we stick with hot glue We need to form a box like this Then we cut the cardboard sheet
for fans And we mark the center with a cross We have recycled a dual fan
from an old computer You can put also 2 individual fans The focus very well and mark its outline Then we cut the hole and the embutimos
fans Leaving the wires out The look without gaps Hot silicone We introduce the iron into the gap between
the legs Putting the fans to throw the
air upwards We adjust well plate And the silicone paste Without gaps We turn the board And draw a line 2.5 cm. of these
2 sides We place the legs with overhead fans
board thus Aligning them with lines and with these
edges And we joined with hot glue without leaving
no gap So that air does not escape Now comes the hard work Make holes board With a needle of 1 mm. thick And a bottle cork We will manufacture the drilling tool The board has many points, and all have
to be perfectly drilled To air out for them Then we board edges In the templates you have all measures
these pieces Must be smaller than 1 cm. thick The two medium also The two longer have twice the thickness We take 2 medium And they stick small one at each end Then we take a strip of cardboard the same
workpiece thickness The paste on one edge with silicone
hot Pressing well so there are no potholes Also we line the corners We cut the paperboard edges remaining
in the middle And we stuck bending inward We will in all parts only by a
expensive Also on long pieces We stick the edges with the edges covered
facing the board The hollow short pieces is aligned with
the hole board The edges are outside the blue line They surround the board to hit the disc
in them And leave a hole on each side of the field What are the goals To be better forraremos entire carton
exposed with cardboard Not only the edges Also we line the legs with cardboard
other color Our table is finished For goalkeepers We need two metal covers They make a hole in the middle And we nailed a screw head inside
cap Then we screw a cork It’s tight so that it does not move We take a balloon and cut the part of
down Then he knotted the nozzle Which protrudes cut the knot We circled the globe E we introduce the cork in the nozzle
this way Then we stretch the balloon to cover all
the lid Then we cut a piece of cardboard
of a milk carton or juice We place the top goalkeeper and mark its outline Then we cut the circle And we stuck covering the bottom of the
goalie With instant adhesive We have to do two goalkeepers Each color For the record We make two circles of cardboard using
a compass We opened it to 2.5 cm. We draw the circle and we cut Let’s make a sandwich with these two circles
cardstock And what will be in the middle it is white cork
pack in Cut sheet half centimeter
thick And we hit one of the circles with glue
bar We cut the cork around the circle
with a knife Then we stick the other circle and we have
our sandwich To finish the cork cover Cut a strip of cardboard the same thickness
the disc And the stick in singing with hot glue This is not just decoration Also hardens the edge of the disc to
to endure the blows Inside it is like cork The disc weighs very little To finish cut a cardboard ring
Brick Using the compass mark a circle
disk size And another 2 cm. radio, which is the red Cut with the blade both And we have our ring This one will stick on one side of
instant adhesive disc The ring will be the part that touches the board As its surface is much smaller and others
leaves a hole in the center disk Creates an air bed that allows this
buoyed by the table The best way to energize fans
It is to use a transformer You just have to keep in mind that the voltage
and amperage are the same as those of the fans We connect the fan cables directly
the transformer And we have set our air hockey This is another original creations
of TDCSH Thanks to the ideas you aportáis in your
comments If you also have an idea and want
that actually do Leave her comments Give us a LIKE if you also like our
air hockey And do not forget to share it on your network
social So far today’s video I hope you liked it And we see in the next

AIR HOCKEY casero – MÁQUINA RECREATIVA, cómo se hace | Te Digo Cómo
Tagged on:                                                             

100 thoughts on “AIR HOCKEY casero – MÁQUINA RECREATIVA, cómo se hace | Te Digo Cómo

  • May 14, 2018 at 7:01 pm
    Permalink

    El guantelete del infinito con Las gemas

    Reply
  • May 20, 2018 at 6:47 am
    Permalink

    alguien me pude dar un link para las medidas like si vienes un año despues y lo quieres hacer

    Reply
  • May 22, 2018 at 6:01 pm
    Permalink

    Un perro robotico

    Reply
  • May 24, 2018 at 8:00 pm
    Permalink

    Vaya unos crack estais hechos

    Reply
  • May 26, 2018 at 2:31 am
    Permalink

    podrían hacer un accesorio de ahiron man

    Reply
  • May 30, 2018 at 2:36 am
    Permalink

    Vonito

    Reply
  • June 1, 2018 at 3:13 am
    Permalink

    Hola la verdad muy bueno todo lo que hacen y me encantaría que si querían hacer un metegol se los agradecería muchísimo muchas gracias

    Reply
  • June 2, 2018 at 12:58 pm
    Permalink

    sabeis que cuando voy al enlance para saber las medidas no me deja solo aparece una foto del air hockey y ya esta y lo mismo pasa con la plantilla aregladlo por favor

    Reply
  • June 8, 2018 at 1:04 am
    Permalink

    Hagan un Dron

    Reply
  • June 13, 2018 at 10:14 pm
    Permalink

    quiero que hagan otro juego de mesa

    Reply
  • June 15, 2018 at 8:58 pm
    Permalink

    Faltan los marcadores

    Reply
  • June 16, 2018 at 12:09 am
    Permalink

    POR FA HAGAN MAS MUEBLES GAMER

    Reply
  • June 24, 2018 at 3:31 am
    Permalink

    Tal vez la plantillas ara elaborar el proyecto un poco más grande gracias

    Reply
  • June 29, 2018 at 7:30 am
    Permalink

    Se podría sustituir el cartón por madera?

    Reply
  • July 3, 2018 at 11:02 am
    Permalink

    el batcinturon xD

    Reply
  • July 13, 2018 at 4:46 pm
    Permalink

    no se merece 60m sino 500m 😀

    Reply
  • July 13, 2018 at 4:47 pm
    Permalink

    TDCSH ES EL MEJOR

    Reply
  • July 15, 2018 at 1:00 am
    Permalink

    Ya la hice y le coloque varios ventiladores pero nana de nada. No funciona que sera? Ayuda!!!

    Reply
  • July 17, 2018 at 3:08 pm
    Permalink

    Oigan, alguien podría decirme cuales son los materiales?
    La página ya no existe :'(

    Reply
  • July 18, 2018 at 2:05 am
    Permalink

    Nuevo sub

    Reply
  • July 21, 2018 at 8:31 pm
    Permalink

    Yo me lo hago sin la electricidad

    Reply
  • July 22, 2018 at 5:22 pm
    Permalink

    Para todo ese trabajo mejor descargo una App de Air Hockey en la Playstore

    Reply
  • July 22, 2018 at 5:22 pm
    Permalink

    Pero esta muy bueno el vídeo

    Reply
  • July 23, 2018 at 12:14 am
    Permalink

    Porque no ases una maquina que este comdinada con fudbol y pinbol

    Reply
  • July 23, 2018 at 7:58 pm
    Permalink

    Parabéns… muito bem explicado!!!

    Reply
  • July 24, 2018 at 7:40 pm
    Permalink

    podriais hacer juegos de magia

    Reply
  • August 1, 2018 at 10:50 pm
    Permalink

    vaya tela

    Reply
  • August 7, 2018 at 3:12 pm
    Permalink

    Excelente!

    Reply
  • September 3, 2018 at 10:10 pm
    Permalink

    se podra usar un ventilador normal

    Reply
  • September 5, 2018 at 10:17 pm
    Permalink

    FAKE

    Reply
  • September 5, 2018 at 10:17 pm
    Permalink

    Esto es falso

    Reply
  • September 25, 2018 at 9:59 pm
    Permalink

    Buenas tardes, les mando saludos desde Perú, una consulta, no funciona el link de materiales ¿Podrían arreglarlo porfavor?. Gracias

    Reply
  • September 30, 2018 at 9:42 am
    Permalink

    Hola buenas el link de los materiales está malo :c

    Reply
  • October 3, 2018 at 1:03 am
    Permalink

    Hola me gustaría que muestren como hacer un cajero automático

    Reply
  • October 18, 2018 at 12:24 am
    Permalink

    Wow.. Chavales me gusto su trabajo los felicito. Like

    Reply
  • October 27, 2018 at 4:24 am
    Permalink

    Pueden hacer una castillo de princesa es para mi hija para q oueda jugar con sus muñecas xfa

    Reply
  • October 30, 2018 at 12:15 am
    Permalink

    Like sí viste las letras moradas

    Reply
  • November 1, 2018 at 11:07 pm
    Permalink

    Los materiales no aparecen

    Reply
  • November 4, 2018 at 6:50 pm
    Permalink

    hey we los materiales no aparecen

    Reply
  • November 8, 2018 at 4:36 am
    Permalink

    La pregunta es que accesorio de superheroe te gustaria que hicieramos ami me gustaria el guantelete de thano por cierto esta en el minuto 11:22

    Reply
  • November 19, 2018 at 5:42 am
    Permalink

    0:49 The circle game

    Reply
  • December 1, 2018 at 6:18 pm
    Permalink

    Las tapas metálicas de q producto era?

    Reply
  • January 5, 2019 at 2:56 am
    Permalink

    De halo multijugador

    Reply
  • January 12, 2019 at 3:13 am
    Permalink

    Un accesorio de superheroe ? Podrían hacer el batarang de batman con las bombas del duende verde y el planeador

    Reply
  • January 19, 2019 at 2:53 pm
    Permalink

    Me gusto el video y me gustaria que hagan un futvito casero

    Reply
  • January 24, 2019 at 5:11 am
    Permalink

    Tengo una idea de una maquina de pelotas saltarina

    Reply
  • January 25, 2019 at 7:09 pm
    Permalink

    Quiero que haga un coche control remoto de cartón

    Reply
  • January 30, 2019 at 8:08 pm
    Permalink

    sería más útil si pudieran las medidas

    Reply
  • February 8, 2019 at 2:29 pm
    Permalink

    soy el unico que abdoribio la informacion en 4 segundos?

    Reply
  • February 17, 2019 at 10:24 pm
    Permalink

    Como hacer mesa de ping pong

    Reply
  • February 23, 2019 at 10:43 pm
    Permalink

    porfavor pueden hacer un futbolista casero les daré un línea si lo hacen

    Reply
  • March 2, 2019 at 4:32 am
    Permalink

    Like si te gusta TDCSH

    Reply
  • March 8, 2019 at 8:00 pm
    Permalink

    Like si lo haces por prooo ps los linck estan rotos

    Reply
  • March 16, 2019 at 2:43 pm
    Permalink

    Me gustaría que le agregue la parte del circuito para monedas y con audio cada vez que anote un gol seria mas creativo y un reto calro si es que lo pueden realizar , buen aporte

    Reply
  • March 28, 2019 at 11:51 pm
    Permalink

    hagan un carro dron V:

    Reply
  • April 5, 2019 at 9:51 pm
    Permalink

    una mesa de ping pong

    Reply
  • April 13, 2019 at 6:00 pm
    Permalink

    No me habren las plantillas

    Reply
  • April 24, 2019 at 9:29 pm
    Permalink

    soy el único al k le aparece k es peligroso el sitio web de las plantillas

    Reply
  • April 28, 2019 at 6:56 pm
    Permalink

    Una maquina de palomitas

    Reply
  • May 3, 2019 at 6:25 pm
    Permalink

    Pořádá agan un tutorial de cómo hacer batalla naval

    Reply
  • May 8, 2019 at 8:28 pm
    Permalink

    las medidas que la pagina tienes virus

    Reply
  • May 16, 2019 at 11:40 pm
    Permalink

    De accesorio:un kunai de naruto

    Reply
  • May 17, 2019 at 12:24 am
    Permalink

    Agan una mesa de futbolito

    Reply
  • May 24, 2019 at 5:13 pm
    Permalink

    Futbolín

    Reply
  • June 2, 2019 at 4:51 am
    Permalink

    y las plantillas???????????????????????????????????????????

    Reply
  • June 3, 2019 at 5:11 am
    Permalink

    Por que ya no estan las medidas y las plantilla?

    Reply
  • June 3, 2019 at 9:09 pm
    Permalink

    Mesa de billar

    Reply
  • June 3, 2019 at 9:09 pm
    Permalink

    Mesa de billar

    Reply
  • June 14, 2019 at 12:28 am
    Permalink

    El hacha de thor

    Reply
  • June 14, 2019 at 4:17 am
    Permalink

    Necesito las plantillas pero no las encuentro en la descripcion

    Reply
  • June 14, 2019 at 4:21 am
    Permalink

    Y las plantillaS

    Reply
  • June 28, 2019 at 2:38 pm
    Permalink

    Hagan una mesa de billar

    Reply
  • June 28, 2019 at 3:05 pm
    Permalink

    Y las plantillas?

    Reply
  • July 9, 2019 at 4:07 pm
    Permalink

    No me aparece nada para poder descargar

    Reply
  • July 11, 2019 at 9:21 pm
    Permalink

    Plantillas wey no mames

    Reply
  • July 16, 2019 at 12:00 am
    Permalink

    el accesorio de super héroe que me gustaría que hicieran es las garras de wolverine

    Reply
  • July 16, 2019 at 12:10 am
    Permalink

    Hola, no veo el enlace de las medidas y plantillas, ni de materiales ni herramientas

    Reply
  • July 16, 2019 at 12:43 am
    Permalink

    por favor respondan rapido

    Reply
  • July 19, 2019 at 10:47 pm
    Permalink

    Disculpen de donde descargo las plantillas

    Reply
  • July 21, 2019 at 8:37 pm
    Permalink

    Y si quiero hacer un poco mas grande el tablero, cuantos ventiladores necesito?

    Reply
  • July 21, 2019 at 10:03 pm
    Permalink

    Donde están las plantillas?

    Reply
  • July 23, 2019 at 9:55 pm
    Permalink

    oigan no puedo ver ni descargar las plantillas como le hago

    Reply
  • July 25, 2019 at 9:29 pm
    Permalink

    Oigan no me salen las medidas no las encuentro

    Reply
  • July 28, 2019 at 4:57 am
    Permalink

    donde descargo las plntillas y medidas

    Reply
  • July 29, 2019 at 3:12 am
    Permalink

    Un campo de básquet

    Reply
  • August 8, 2019 at 4:27 am
    Permalink

    Donde están las plantillas de la mesa de a ir hockey?

    Reply
  • August 8, 2019 at 4:31 pm
    Permalink

    Un mini futbolin

    Reply
  • August 10, 2019 at 2:26 am
    Permalink

    Y las plantillas donde las encuentro?

    Reply
  • August 14, 2019 at 8:09 pm
    Permalink

    Donde están los materiales?

    Reply
  • August 19, 2019 at 2:06 pm
    Permalink

    Una pregunta, ¿Porque no me aparece el link para las plantillas? Ayudaaaa

    Reply
  • August 19, 2019 at 10:35 pm
    Permalink

    Podrían subir el link de las plantillas?

    Reply
  • August 29, 2019 at 5:27 pm
    Permalink

    Donde puedo obtener los planos

    Reply
  • August 29, 2019 at 5:28 pm
    Permalink

    Gracias

    Reply
  • August 30, 2019 at 1:01 pm
    Permalink

    el martillo de thor

    Reply
  • September 3, 2019 at 12:30 am
    Permalink

    Me puedes dar las plantillas porfa

    Reply
  • September 3, 2019 at 10:02 pm
    Permalink

    disculpen como descargo las plantillas no estan en la descripcion

    Reply
  • September 3, 2019 at 10:03 pm
    Permalink

    no estan las medidas y plantillas ni lo de los materiales ayuda porfavor quiero hacerlo son geniales

    Reply
  • September 7, 2019 at 5:53 pm
    Permalink

    Las plantillas?

    Reply
  • September 15, 2019 at 12:51 am
    Permalink

    La cabeza de Stive

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *